Discussion:
System error 1326 has occurred - Logon failure:
(too old to reply)
c***@yahoo.com
2006-06-16 10:49:02 UTC
Permalink
hi,

on the command i get these error when try to use the net use command

Below are the step that hav been try
1)net use \\servername /user:administrator password

I have try ip but still cant, when i enable the guest user account i am able
to use the following command net use \\servername but not to net use
\\servername\c$

What will be the root cause, i m running win2k3 standard
Pegasus (MVP)
2006-06-16 11:25:52 UTC
Permalink
Post by c***@yahoo.com
hi,
on the command i get these error when try to use the net use command
Below are the step that hav been try
1)net use \\servername /user:administrator password
I have try ip but still cant, when i enable the guest user account i am able
to use the following command net use \\servername but not to net use
\\servername\c$
What will be the root cause, i m running win2k3 standard
Try this instead:

net use \\servername\ShareName /user:DomainName\administrator password
c***@yahoo.com
2006-06-16 19:24:03 UTC
Permalink
hello,

It still prompt me with the same error
System error 1326 has occurred.

Logon failure: unknown user name or bad password.

I can confirm the user id and password are correct.what other thing i still
can do,kindly advise
Post by Pegasus (MVP)
Post by c***@yahoo.com
hi,
on the command i get these error when try to use the net use command
Below are the step that hav been try
1)net use \\servername /user:administrator password
I have try ip but still cant, when i enable the guest user account i am
able
Post by c***@yahoo.com
to use the following command net use \\servername but not to net use
\\servername\c$
What will be the root cause, i m running win2k3 standard
net use \\servername\ShareName /user:DomainName\administrator password
Pegasus (MVP)
2006-06-16 23:14:20 UTC
Permalink
This means that your account/password information is
not acceptable to the machine hosting the share. Create
a new account/password on BOTH machines and try again.
Post by c***@yahoo.com
hello,
It still prompt me with the same error
System error 1326 has occurred.
Logon failure: unknown user name or bad password.
I can confirm the user id and password are correct.what other thing i still
can do,kindly advise
Post by Pegasus (MVP)
Post by c***@yahoo.com
hi,
on the command i get these error when try to use the net use command
Below are the step that hav been try
1)net use \\servername /user:administrator password
I have try ip but still cant, when i enable the guest user account i am
able
Post by c***@yahoo.com
to use the following command net use \\servername but not to net use
\\servername\c$
What will be the root cause, i m running win2k3 standard
net use \\servername\ShareName /user:DomainName\administrator password
c***@yahoo.com
2006-06-17 05:09:01 UTC
Permalink
hello,

I have try create a user id on the remote machine and use the same method to
login but still cant, before that I have apply a highsec.inf which is a
default policy on the window and after i apply that only i cant do the
mapping, is that will be the root cause?Now i try to revery by using the
compactws.inf but it seem to be not helping also.Kindly advise, realy need
your help on these
Post by Pegasus (MVP)
This means that your account/password information is
not acceptable to the machine hosting the share. Create
a new account/password on BOTH machines and try again.
Post by c***@yahoo.com
hello,
It still prompt me with the same error
System error 1326 has occurred.
Logon failure: unknown user name or bad password.
I can confirm the user id and password are correct.what other thing i
still
Post by c***@yahoo.com
can do,kindly advise
Post by Pegasus (MVP)
Post by c***@yahoo.com
hi,
on the command i get these error when try to use the net use command
Below are the step that hav been try
1)net use \\servername /user:administrator password
I have try ip but still cant, when i enable the guest user account i
am
Post by c***@yahoo.com
Post by Pegasus (MVP)
able
Post by c***@yahoo.com
to use the following command net use \\servername but not to net use
\\servername\c$
What will be the root cause, i m running win2k3 standard
net use \\servername\ShareName /user:DomainName\administrator password
Pegasus (MVP)
2006-06-17 07:06:10 UTC
Permalink
Sorry, I have no experience with the .inf files you mention.
Post by c***@yahoo.com
hello,
I have try create a user id on the remote machine and use the same method to
login but still cant, before that I have apply a highsec.inf which is a
default policy on the window and after i apply that only i cant do the
mapping, is that will be the root cause?Now i try to revery by using the
compactws.inf but it seem to be not helping also.Kindly advise, realy need
your help on these
Post by Pegasus (MVP)
This means that your account/password information is
not acceptable to the machine hosting the share. Create
a new account/password on BOTH machines and try again.
Post by c***@yahoo.com
hello,
It still prompt me with the same error
System error 1326 has occurred.
Logon failure: unknown user name or bad password.
I can confirm the user id and password are correct.what other thing i
still
Post by c***@yahoo.com
can do,kindly advise
Post by Pegasus (MVP)
Post by c***@yahoo.com
hi,
on the command i get these error when try to use the net use command
Below are the step that hav been try
1)net use \\servername /user:administrator password
I have try ip but still cant, when i enable the guest user account i
am
Post by c***@yahoo.com
Post by Pegasus (MVP)
able
Post by c***@yahoo.com
to use the following command net use \\servername but not to net use
\\servername\c$
What will be the root cause, i m running win2k3 standard
net use \\servername\ShareName /user:DomainName\administrator password
c***@yahoo.com
2006-06-17 07:25:02 UTC
Permalink
hi,

I think i have manage to solve my problem, it is cause by the ntlm and the
smb signing by the server, any way thank for the guide is given
Post by Pegasus (MVP)
Sorry, I have no experience with the .inf files you mention.
Post by c***@yahoo.com
hello,
I have try create a user id on the remote machine and use the same method
to
Post by c***@yahoo.com
login but still cant, before that I have apply a highsec.inf which is a
default policy on the window and after i apply that only i cant do the
mapping, is that will be the root cause?Now i try to revery by using the
compactws.inf but it seem to be not helping also.Kindly advise, realy need
your help on these
Post by Pegasus (MVP)
This means that your account/password information is
not acceptable to the machine hosting the share. Create
a new account/password on BOTH machines and try again.
Post by c***@yahoo.com
hello,
It still prompt me with the same error
System error 1326 has occurred.
Logon failure: unknown user name or bad password.
I can confirm the user id and password are correct.what other thing i
still
Post by c***@yahoo.com
can do,kindly advise
Post by Pegasus (MVP)
Post by c***@yahoo.com
hi,
on the command i get these error when try to use the net use
command
Post by c***@yahoo.com
Post by Pegasus (MVP)
Post by c***@yahoo.com
Post by Pegasus (MVP)
Post by c***@yahoo.com
Below are the step that hav been try
1)net use \\servername /user:administrator password
I have try ip but still cant, when i enable the guest user account
i
Post by c***@yahoo.com
Post by Pegasus (MVP)
am
Post by c***@yahoo.com
Post by Pegasus (MVP)
able
Post by c***@yahoo.com
to use the following command net use \\servername but not to net
use
Post by c***@yahoo.com
Post by Pegasus (MVP)
Post by c***@yahoo.com
Post by Pegasus (MVP)
Post by c***@yahoo.com
\\servername\c$
What will be the root cause, i m running win2k3 standard
net use \\servername\ShareName /user:DomainName\administrator
password
Edwin vMierlo
2006-06-17 07:25:42 UTC
Permalink
I do not have much experience with .inf file either, however

error 1326 translate to ERROR_LOGON_FAILURE
hence you need to look for the solution in this area

you command "net use \\<servername> /user:<username> <password>" is not
really a valid command, you do need to specify a resource/share you want to
use
ensure you do use a share name, even when it is IPC$
Example "net use \\<servername>\IPC$ /user:<domainname>\<username>
<password>" is a valid command
Post by c***@yahoo.com
hello,
I have try create a user id on the remote machine and use the same method to
login but still cant, before that I have apply a highsec.inf which is a
default policy on the window and after i apply that only i cant do the
mapping, is that will be the root cause?Now i try to revery by using the
compactws.inf but it seem to be not helping also.Kindly advise, realy need
your help on these
Post by Pegasus (MVP)
This means that your account/password information is
not acceptable to the machine hosting the share. Create
a new account/password on BOTH machines and try again.
Post by c***@yahoo.com
hello,
It still prompt me with the same error
System error 1326 has occurred.
Logon failure: unknown user name or bad password.
I can confirm the user id and password are correct.what other thing i
still
Post by c***@yahoo.com
can do,kindly advise
Post by Pegasus (MVP)
Post by c***@yahoo.com
hi,
on the command i get these error when try to use the net use command
Below are the step that hav been try
1)net use \\servername /user:administrator password
I have try ip but still cant, when i enable the guest user account i
am
Post by c***@yahoo.com
Post by Pegasus (MVP)
able
Post by c***@yahoo.com
to use the following command net use \\servername but not to net use
\\servername\c$
What will be the root cause, i m running win2k3 standard
net use \\servername\ShareName /user:DomainName\administrator password
c***@yahoo.com
2006-06-17 09:45:01 UTC
Permalink
hello,

Thank you for your reply,the command i put is valid and it can be used and I
have find out the root cause of it, it was cause by the smb sign and also on
the ntlm
Post by Edwin vMierlo
I do not have much experience with .inf file either, however
error 1326 translate to ERROR_LOGON_FAILURE
hence you need to look for the solution in this area
you command "net use \\<servername> /user:<username> <password>" is not
really a valid command, you do need to specify a resource/share you want to
use
ensure you do use a share name, even when it is IPC$
Example "net use \\<servername>\IPC$ /user:<domainname>\<username>
<password>" is a valid command
Post by c***@yahoo.com
hello,
I have try create a user id on the remote machine and use the same method
to
Post by c***@yahoo.com
login but still cant, before that I have apply a highsec.inf which is a
default policy on the window and after i apply that only i cant do the
mapping, is that will be the root cause?Now i try to revery by using the
compactws.inf but it seem to be not helping also.Kindly advise, realy need
your help on these
Post by Pegasus (MVP)
This means that your account/password information is
not acceptable to the machine hosting the share. Create
a new account/password on BOTH machines and try again.
Post by c***@yahoo.com
hello,
It still prompt me with the same error
System error 1326 has occurred.
Logon failure: unknown user name or bad password.
I can confirm the user id and password are correct.what other thing i
still
Post by c***@yahoo.com
can do,kindly advise
Post by Pegasus (MVP)
Post by c***@yahoo.com
hi,
on the command i get these error when try to use the net use
command
Post by c***@yahoo.com
Post by Pegasus (MVP)
Post by c***@yahoo.com
Post by Pegasus (MVP)
Post by c***@yahoo.com
Below are the step that hav been try
1)net use \\servername /user:administrator password
I have try ip but still cant, when i enable the guest user account
i
Post by c***@yahoo.com
Post by Pegasus (MVP)
am
Post by c***@yahoo.com
Post by Pegasus (MVP)
able
Post by c***@yahoo.com
to use the following command net use \\servername but not to net
use
Post by c***@yahoo.com
Post by Pegasus (MVP)
Post by c***@yahoo.com
Post by Pegasus (MVP)
Post by c***@yahoo.com
\\servername\c$
What will be the root cause, i m running win2k3 standard
net use \\servername\ShareName /user:DomainName\administrator
password
Loading...